Cara Menghitamkan Body Motor

>

Hello Sohib EditorOnline, are you looking for ways to make your motorcycle look sleek and stylish? One way to achieve this is by blackening the body of your motorcycle. In this article, we will discuss various ways to make your motorcycle look more attractive by blackening its body.

What is the process of blackening the body of a motorcycle?

Blackening the body of a motorcycle can be done in various ways. Some of the methods include:

1. Using spray paint
2. Using a brush and black paint
3. Using plasti dip
4. Using vinyl wrapping

Using Spray Paint

The most commonly used method for blackening the body of a motorcycle is using spray paint. This method is relatively easy to use and does not require much effort. Below are the steps involved in using spray paint to blacken your motorcycle’s body:

1. Clean the body of your motorcycle with soap and water to remove any dirt or grime present on the surface. Make sure to dry the body before moving to the next step.
2. Cover the parts of the motorcycle that you do not want to paint with masking tape or newspaper.
3. Shake the spray paint can well before use and hold it at a distance of 6-8 inches from the surface of the body.
4. Spray the paint onto the surface in a back-and-forth motion, making sure to apply a thin and even layer.
5. Let the paint dry for at least 30 minutes before applying a second coat. Apply a third coat if necessary.
6. Let the paint dry completely for at least 24 hours before removing the masking tape or newspaper.

Using a Brush and Black Paint

Another way to blacken the body of your motorcycle is by using a brush and black paint. Here are the steps involved in using a brush and black paint:

1. Clean the body of your motorcycle with soap and water to remove any dirt or grime present on the surface. Make sure to dry the body before moving to the next step.
2. Mix the black paint well before use.
3. Dip a brush into the paint and apply it onto the surface in a back-and-forth motion, making sure to apply a thin and even layer.
4. Let the paint dry for at least 30 minutes before applying a second coat. Apply a third coat if necessary.
5. Let the paint dry completely for at least 24 hours before removing the masking tape or newspaper.

Using Plasti Dip

Plasti Dip is a liquid rubber coating that can be sprayed onto the surface of your motorcycle’s body to blacken it. Here are the steps involved in using Plasti Dip:

1. Clean the body of your motorcycle with soap and water to remove any dirt or grime present on the surface. Make sure to dry the body before moving to the next step.
2. Cover the parts of the motorcycle that you do not want to paint with masking tape or newspaper.
3. Shake the Plasti Dip can well before use and hold it at a distance of 6-8 inches from the surface of the body.
4. Spray the Plasti Dip onto the surface in a back-and-forth motion, making sure to apply a thin and even layer.
5. Let the Plasti Dip dry for at least 30 minutes before applying a second coat. Apply a third coat if necessary.
6. Let the Plasti Dip dry completely for at least 24 hours before removing the masking tape or newspaper.

Using Vinyl Wrapping

Vinyl wrapping is another method that can be used to blacken the body of your motorcycle. Here are the steps involved in using vinyl wrapping:

1. Clean the body of your motorcycle with soap and water to remove any dirt or grime present on the surface. Make sure to dry the body before moving to the next step.
2. Measure the amount of vinyl wrap that you will need to cover the surface of your motorcycle’s body.
3. Cut the vinyl wrap according to the measurements taken in the previous step.
4. Peel off the backing paper of the vinyl wrap and apply it onto the surface in a back-and-forth motion, making sure to apply it evenly without any creases or air bubbles.
5. Cut off any excess vinyl wrap with a sharp blade.
6. Heat up the vinyl wrap with a heat gun to make it adhere properly to the surface of the body.

What are some tips for maintaining the black body of a motorcycle?

Once you have blackened the body of your motorcycle, it is important to maintain it to keep it looking sleek and stylish. Here are some tips for maintaining the black body of your motorcycle:

• Wash the body of your motorcycle regularly with soap and water to remove any dirt or grime present on the surface.
• Avoid using harsh chemicals or abrasive materials to clean the body of your motorcycle.
• Apply a wax or polish to the surface of the body to protect it from fading or cracking due to exposure to the sun’s UV rays.
• Avoid parking your motorcycle under direct sunlight for long periods of time.

FAQs

Q: Is it legal to blacken the body of a motorcycle?

A: Yes, it is legal to blacken the body of a motorcycle as long as the modifications do not affect the performance or safety of the motorcycle.

Q: How long does it take to blacken the body of a motorcycle?

A: The time it takes to blacken the body of a motorcycle depends on the method used and the number of coats applied. Generally, it takes anywhere from a few hours to a few days to blacken the body of a motorcycle.

Q: Can I remove the black paint or Plasti Dip from the body of my motorcycle?

A: Yes, you can remove the black paint or Plasti Dip from the body of your motorcycle by using a paint stripper or Plasti Dip remover.

Q: Is it necessary to use a primer before applying the black paint or Plasti Dip?

A: It is not necessary to use a primer before applying the black paint or Plasti Dip, but it is recommended as it will help the paint or Plasti Dip to adhere better to the surface of the body.

In conclusion, there are various methods that can be used to blacken the body of a motorcycle, each with their own pros and cons. It is important to choose the method that best suits your needs and budget. Remember to maintain the black body of your motorcycle to keep it looking sleek and stylish.

Cara Menghitamkan Body Motor