Cara Membuat Antena Penguat Sinyal HP di Rumah

>Hello Sohib EditorOnline, welcome to this journal article about cara membuat antena penguat sinyal hp di rumah. In this article, we’ll guide you through the process of building your own antenna to boost your mobile phone signal. With just a few simple materials and tools, you can improve your phone’s connectivity at home. Let’s get started!

What You Need

Before we dive into the construction process, let’s go over the materials and tools you’ll need to build your own antenna. Here’s what you’ll need:

Materials Tools
Coaxial cable Soldering iron
Copper wire Wire stripper
Wire mesh Cutter
Insulating tape Drilling machine

Now that you have everything you need, let’s move on to the construction process.

Construction Process

Follow these steps to build your own antenna:

Step 1: Cut the Wire

Start by cutting a length of copper wire to 19.3 cm. This will be the length of the radiating element of the antenna.

Step 2: Strip the Wire

Strip about 2 cm of insulation from one end of the wire using the wire stripper. This will expose the inner copper conductor.

Step 3: Shape the Wire

Bend the exposed end of the wire at a right angle, about 1 cm from the end. This will be the point where the wire connects to the coaxial cable.

Step 4: Cut the Coaxial Cable

Now, cut the coaxial cable to a length of 26.4 cm. This will be the length of the coaxial cable element of the antenna.

Step 5: Strip the Coaxial Cable

Strip away about 3 cm of the outer insulation from one end of the coaxial cable. This will expose the inner conductor and a braided shield.

Step 6: Prepare the Connector

Peel back the braided shield and fold it back over the outer insulation. Then, twist the inner conductor into a loop and insert it into the wire mesh. Finally, fold the wire mesh back over the braided shield.

TRENDING 🔥  Cara Menambah Masa Aktif Telkomsel untuk Pengguna Setia

Step 7: Solder the Wire to the Connector

Use the soldering iron to solder the end of the copper wire to the loop of the inner conductor of the coaxial cable.

Step 8: Insulate the Connection

Wrap the connection in insulating tape to protect it from moisture and damage.

Step 9: Attach the Antenna to Your Phone

Finally, attach the antenna to your phone by inserting the connector into the phone’s antenna port. Adjust the angle of the antenna until you get the strongest signal.

FAQ

Q: What is the purpose of this antenna?

A: This antenna is designed to boost your mobile phone signal, improving your phone’s connectivity at home.

Q: How much does it cost to build this antenna?

A: The materials for this antenna should cost no more than $10.

Q: How long does it take to build this antenna?

A: It should take about 30 minutes to build this antenna.

Q: Will this antenna work with any type of mobile phone?

A: This antenna should work with any mobile phone that has an antenna port.

Q: How do I know if my antenna is working?

A: You can test your antenna by checking your phone’s signal strength before and after attaching the antenna. You should see an improvement in signal strength.

Conclusion

Congratulations! You now know how to build your own antenna to boost your mobile phone signal at home. With just a few simple materials and tools, you can improve your phone’s connectivity and stay connected with your loved ones. We hope you found this article helpful. Happy building!

Cara Membuat Antena Penguat Sinyal HP di Rumah