Cara Flash Asus Zenfone Go X014D via Flashtool

>Hello Sohib EditorOnline, if you’re looking for a way to flash your Asus Zenfone Go X014D via Flashtool, you have come to the right place. In this article, we will guide you step by step on how to flash your device, from downloading the necessary files to troubleshooting common issues. Let’s get started!

Before You Begin

Before you start flashing your Asus Zenfone Go X014D, there are a few things you need to keep in mind:

  1. Make sure your device has at least 60% battery life to avoid any interruptions during the flashing process.
  2. Back up all your important data, as the flashing process will erase all the data on your device.
  3. Download the necessary files and tools, which we will discuss in the next section.

What You Will Need

Here are the files and tools you will need to flash your Asus Zenfone Go X014D via Flashtool:

File/Tool Description
Asus Zenfone Go X014D firmware The firmware file contains the operating system and other necessary software for your device
Flashtool A software used to flash firmware onto Android devices
USB Drivers Drivers that allow your computer to recognize your device when connected via USB cable
USB Cable A USB cable to connect your device to your computer

Where to Download the Files/Tools

You can download the Asus Zenfone Go X014D firmware, Flashtool, and USB Drivers from the links below:

  1. Asus Zenfone Go X014D firmware: https://www.asus.com/supportonly/x014d/HelpDesk_Download/
  2. Flashtool: https://androidmtk.com/category/tools
  3. USB Drivers: https://androidmtk.com/category/drivers

How to Flash Asus Zenfone Go X014D via Flashtool

Now that you have downloaded the necessary files and tools, let’s start flashing your Asus Zenfone Go X014D:

Step 1: Install USB Drivers

Before you can start flashing your device, you need to install the USB Drivers on your computer. Follow these steps:

  1. Unzip the downloaded USB Drivers file.
  2. Connect your device to your computer via USB cable.
  3. Open Device Manager on your computer.
  4. Right-click on your device and select “Update Driver Software”.
  5. Select “Browse my computer for driver software” and navigate to the unzipped USB Drivers folder.
  6. Click “Next” to install the driver.

Step 2: Install Flashtool

Next, you need to install Flashtool on your computer. Follow these steps:

  1. Unzip the downloaded Flashtool file.
  2. Run the Flashtool setup file and follow the on-screen instructions to install it on your computer.
TRENDING 🔥  Cara Memakai Dana: Panduan Lengkap untuk Sohib EditorOnline

Step 3: Prepare Your Device

Before you can start flashing your device, you need to enable USB debugging and OEM unlocking on your device. Follow these steps:

  1. Go to “Settings” on your device.
  2. Scroll down and select “About Phone”.
  3. Tap on “Build number” seven times to enable Developer Options.
  4. Go back to “Settings” and select “Developer Options”.
  5. Enable “USB Debugging” and “OEM Unlocking”.

Step 4: Flash the Firmware

Now that you have prepared your device and computer, you can start flashing the firmware onto your device. Follow these steps:

  1. Extract the downloaded firmware file to a folder on your computer.
  2. Run Flashtool on your computer.
  3. Click on “Scatter-loading” and navigate to the extracted firmware folder.
  4. Select the scatter file and click “Open”.
  5. Click on “Download” to start the flashing process.
  6. Connect your device to your computer via USB cable.
  7. The flashing process will start automatically and might take a few minutes. Do not disconnect your device during the process.
  8. Once the flashing process is complete, you will see a “Download OK” message on Flashtool.
  9. Disconnect your device from your computer and turn it on.

FAQ

Does flashing my Asus Zenfone Go X014D void the warranty?

Flashing your device may void the warranty, so proceed at your own risk.

What should I do if the flashing process fails?

If the flashing process fails, try the following:

  1. Ensure that your device has enough battery life.
  2. Make sure you have downloaded the correct firmware file for your device.
  3. Check that you have installed the USB Drivers and enabled USB debugging and OEM unlocking on your device.
  4. Try using a different USB cable or USB port.
  5. Try flashing the firmware again.

Will flashing my Asus Zenfone Go X014D delete all my data?

Yes, the flashing process will erase all the data on your device, so make sure to back up your important data before proceeding.

Can I revert back to the original firmware after flashing a custom firmware?

Yes, you can revert back to the original firmware by flashing it onto your device using the same method described in this article.

Is it safe to flash my Asus Zenfone Go X014D?

Flashing your device can be risky and may result in a bricked device if not done properly. However, if you follow the instructions in this article carefully, you should be able to flash your device safely.

That’s it for our guide on how to flash Asus Zenfone Go X014D via Flashtool. We hope this article was helpful to you. If you have any questions or suggestions, feel free to leave a comment below. Thank you for reading!

Cara Flash Asus Zenfone Go X014D via Flashtool